Decra Side flash.

Description

Roof to Side Wall w/Side Flashing: Starting at the eave, extend the DECRA Channel 1” past the
eave over the Starter Clip . Work the DECRA Channel behind stucco or wood siding whenever possible or
surface mount to the wall for surfaces like brick and seal with wall flashing . Stone coated counter flashing
can also be used . Overlap the DECRA Channel at least 6” working up the roof . Screws should be spaced
every 12” . Recommendation: apply roof sealant to the fastener heads .
If standard wall flashing is present, tuck DECRA Channel behind existing flashing . If no existing flashing
is present, counter flash with Side Flashing . Seal DECRA Channel to the wall with roofing grade sealant/
adhesive . Apply sealant to the Side Flashing before attaching to the wall .
Cut the XD panel to length and fit into the DECRA Channel flashing at the roof-to-wall . Make a 2” notch at
the front and back Clip-Locks where the panel fits into the DECRA Channel .
Lock the panel into place and screw down outside the second water channel .